Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Installation in Miami: What to Know First
Boral roof installation in Miami typically runs $14,500 to $28,000 for a full replacement on a standard single-family home, and most jobs take four to seven working days once materials land. We are an independent Boral service provider, which means we install and repair Boral concrete and clay tile roofing systems without being tied to any manufacturer’s script. The honest price posture is simple: you get a written line-item quote before any work starts, and that number does not move unless you change the scope. Call (850) 318-3769 to schedule a free estimate.
This page is for Miami homeowners who already have Boral roof tile or are considering it, and who want to know what installation actually involves here: salt air, hurricane season, and a tile profile that behaves differently than asphalt shingle. Dylan Pace and our crew have been re-roofing homes across the Brickell corridor and surrounding neighborhoods long enough to know that a Boral job in Miami is not the same as a Boral job anywhere else.
Key Takeaways
- Boral tile installation in Miami costs $14,500 – $28,000 for most homes, depending on tile profile, decking condition, and underlayment spec.
- We are an independent Boral service provider, not a factory-authorized dealer, so our recommendations are based on what actually holds up in South Florida, not a sales quota.
- Every Boral job includes our 365-Day Done Right Promise in writing, plus before-and-after photo documentation and a digital invoice sent by text.
- Miami’s salt air and hurricane uplift requirements mean underlayment and fastening method matter as much as the tile itself.
Styles & brands we work with






How Boral Products Fail – and How We Fix Them
Boral tile does not fail the way asphalt shingles fail. You will not see granule loss or curling. What you will see in Miami is a specific set of problems tied to how the tile interacts with underlayment, fasteners, and coastal weather. Here is what we run into most often.
- Boral CedarLite cracked tiles from foot traffic or impact. CedarLite is a lightweight concrete tile with a wood-shake profile, and it is popular in Miami because it carries less dead load on older roof decks. The trade-off is that the thinner profile is more brittle under a repair crew’s boots. We see cracked tiles around HVAC units and satellite mounts all the time. The fix is selective tile replacement with a color-matched batch, and we walk the roof with felt-bottom boots to avoid making the problem worse.
- Boral Barcelona barrel tile slipped out of alignment after a storm. The Barcelona profile is a high-relief two-piece barrel tile. In high-wind events, individual tiles can lift if the original installer used the wrong fastener or skipped the foam adhesive at the nose. The symptom is a tile that looks slightly raised or shifted out of the water channel. We reset the tile, verify the underlayment below is still intact, and re-secure using the fastener pattern the Miami-Dade uplift code requires.
- Boral Saxony flat tile leaking at the underlayment seam. Most “Boral tile leaks” in Miami are not tile leaks at all. The underlayment fails first, especially on roofs where the original crew used a single layer of #30 felt. Saxony is a flat, low-profile tile, so water moves across it quickly. When the underlayment seam opens up near a valley or a pipe boot, water gets to the deck. Our fix is a targeted underlayment repair under the affected tile run, which is far cheaper than a re-roof and often all the roof needs.
- Boral Estate Series efflorescence and surface staining. The Estate Series is a thicker, premium concrete tile. In Miami’s humidity and frequent rain, you may see a white chalky film form on the tile surface. That is efflorescence, which is just mineral salts wicking through the concrete. It rarely means the tile is compromised, but it looks bad and owners think they need a new roof. We assess the tile body, explain what is cosmetic versus structural, and clean or replace based on what we find. The material spec from Southern California simply reacts differently in South Florida.
- Boral barrel tile with broken water channels after tree impact. Miami’s live oaks and royal palms drop branches that shatter barrel tile profiles. When a Barcelona or one-piece barrel tile breaks in the middle, water channeling fails and moisture works sideways into the underlayment. The repair is straightforward replacement of the broken tile, but the skill is in matching the texture and color of a tile that has weathered for ten or fifteen years. We keep common Boral profiles and color blends in our Miami inventory for exactly this reason.
Our Boral Roof Installation Process
Here is how a Boral roof installation with us actually goes, from the first call to the final photo.
- 1
Roof assessment and measurement. We walk the roof, map the deck, check the existing underlayment condition, and measure the tile profile. In Miami, we also look at the parapet walls, roof-to-wall flashing, and the existing nailing pattern, because those details decide whether the old tile can be reused or needs full replacement.
- 2
Written scope and price. You receive a line-item proposal that lists the tile profile, underlayment spec, fastener count, flashing details, and the total price. No allowances, no “we’ll see what we find” language. Dylan writes the scopes of work himself.
- 3
Material ordering and scheduling. Boral tile orders in Miami usually land in one to two weeks, depending on the profile and color. We schedule the tear-off date once the materials are confirmed in the warehouse, and we send you a live trackable arrival time on the morning of the job, per The Relay Standard.
- 4
Tear-off, deck inspection, and underlayment. We strip the old roof, inspect the deck for rot from Miami’s humidity and past leaks, and replace any damaged sheathing. Then we install a high-performance synthetic or peel-and-stick underlayment rated for the Dade County wind zone. This step matters more than the tile itself.
- 5
Tile installation and flashing. We lay the Boral tile per the profile-specific fastener pattern, install new flashing at every penetration, chimney, and wall intersection, and verify the overlap streams water cleanly. Photographs are taken at each stage.
- 6
Final walk, documentation, and guarantee. We walk the roof with you or send a photo set showing the completed work. You get a digital invoice by text, your 365-Day Done Right Promise in writing, and a clean job site. Every promise in writing – because a roof shouldn’t come with fine print.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Installation Costs in Miami
Here are the ranges we see for Boral work in Miami, based on roof complexity, tile profile selection, and underlayment upgrades.
- Full Boral tile roof replacement (standard 1,800 – 2,400 sq ft home): $14,500 – $22,000
- Full replacement with premium Boral Estate Series or high-relief profiles: $20,000 – $28,000
- Selective tile repair (cracked or slipped tiles, minor count): $600 – $1,500
- Underlayment repair under existing Boral tile (localized): $1,800 – $3,800
- Flashing and penetration rework on a Boral roof: $900 – $2,400
What moves the price is the deck condition, how many stories, and whether you want to upgrade from the minimum-code underlayment to a higher-grade synthetic or self-adhered product. Roofs along the Brickell corridor and waterfront areas also tend to have more wind-uplift engineering, which affects fastener counts and labor. We will not surprise you with a different number at the end. Call (850) 318-3769 for a free estimate with a written price before any work starts.
Why Miami Homeowners Call Crestview Roofing Co Miami for Boral Work
Boral tile is a long-term roofing material, and it deserves a crew that treats the job like it is the only roof we will ever install. We work with Boral, GAF, Owens Corning, and CertainTeed, so when a homeowner calls us, the recommendation is based on what the roof actually needs, not what we have sitting in the warehouse. Every Boral job, from a single tile replacement to a full re-roof, comes with our 365-Day Done Right Promise in writing: if a covered repair fails within 365 days, we correct it at no charge, including a free second visit. Our technicians are background-checked and uniformed, and you know who is arriving before they pull into your driveway. A live person answers the phone 24/7, because a roof leak at 11 p.m. in Miami does not wait until Monday.
FAQs
No, Boral tile installation performed correctly does not void the tile manufacturer’s warranty. The key is using the correct fastener type and pattern for the specific tile profile and following the Miami-Dade uplift requirements. We document every step with photos, so you have proof the installation was done to spec if a warranty question ever comes up. Call (850) 318-3769 and we will walk you through the warranty-safe approach for your specific Boral profile.
Yes, in most cases we can source discontinued or aged Boral profiles through our Miami supplier network, and when an exact match is not available, we blend tiles from different roof areas so the repair is not obvious. Boral color lots fade differently in Miami sun than they would in a drier climate, so we match to the weathered appearance of your roof, not the factory swatch. Call (850) 318-3769 with a photo of your tile, and we will tell you what is realistic before you schedule anything.
If your Boral roof is under twenty years old and the underlayment is still intact, targeted tile repair is almost always the better call. The tile itself can last fifty years or more; it is the underlayment and flashing that age out first in Miami. We will tell you honestly if a repair is money well spent or if you are patching a roof that needs full replacement. The written estimate makes that call clear.
Most full Boral installations take four to seven working days once materials are on site, with weather delays factored in for Miami’s afternoon storm pattern. Selective tile repairs are usually done in a single visit. We schedule around the NOAA marine forecast so we are not pulling tile off a roof that is about to get hit with a squall. Call (850) 318-3769 to get a realistic timeline for your specific roof.
Written by Dylan Pace, Owner, Crestview Roofing Co Miami at Crestview Roofing Co Miami, serving Miami and nearby areas.