A Crestview company - serving Miami, FL

CertainTeed Ridge Vent Installation Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

CertainTeed Ridge Vent Installation: The Miami Owner’s Guide

We stock and install CertainTeed ridge vent systems throughout Miami, with most installations running $850 to $1,400 for a typical single-family home, parts and labor included. Same-day service is available when we have the vent on the truck, which is most weekdays. Most Miami homeowners discover they need a replacement after seeing shingle granules collecting in the gutters below the ridge line, or after a heavy summer downpour leaves water stains on the ceiling near an exterior wall.

Call (850) 318-3769

Ridge vents are the exhaust half of your attic ventilation system. CertainTeed makes specific models that sit along the peak of your roof and let hot, humid air escape without letting rain in. When the vent material cracks, warps, or separates from the shingle line, you lose that exhaust path and your attic starts cooking. In Miami’s climate, that means higher cooling bills, moisture buildup, and eventually decking rot. We’re an independent roofing contractor, not affiliated with CertainTeed, but we install their vent products regularly because they hold up better than most generic options in South Florida’s UV and salt air.

Key Takeaways:

  • CertainTeed ridge vent replacement in Miami typically costs $850 – $1,400 installed
  • Two main CertainTeed vent lines exist: ShingleVent II and SnowCountry (we’ll explain why Miami homes usually need the ShingleVent II)
  • The vent’s external baffle is usually what fails first, cracking under UV exposure
  • We provide a written price before any work starts, per The Relay Visibility Guarantee
  • Every ridge vent replacement is covered by our 365-Day Done Right Promise

Call (850) 318-3769 for a free estimate. A live person answers 24/7, and we’ll tell you over the phone whether your vent is a standard replacement or something worth looking at in person.

Which CertainTeed Models This Applies To

CertainTeed makes two ridge vent product lines that we install in Miami: ShingleVent II and SnowCountry. If your home is anywhere in Miami-Dade County, you almost certainly have ShingleVent II. SnowCountry is designed for cold climates, with a filter that prevents snow and ice from blowing into the attic. It’s overkill for South Florida, and in heavy rain it can actually restrict airflow more than a standard vent because the filter gets clogged with humidity and dust. We rarely recommend it here.

ShingleVent II comes in 4-foot sections, either 9 inches or 11.25 inches wide. The 9-inch version handles up to 18 square inches of net free area per linear foot. The wider 11.25-inch vent handles up to 20 square inches. What matters for your roof is whether the existing vent was nailed over the ridge or integrated into the shingle course. Some Miami contractors install vent material as an afterthought, overlapping just a few inches of shingle on each side. That’s a leak waiting to happen during hurricane-season wind-driven rain. We see it constantly in older Miami neighborhoods like Shenandoah and Silver Bluff.

For a replacement, OEM CertainTeed ShingleVent II is what we recommend, not a generic vent. The plastic compound CertainTeed uses has a UV stabilizer that cheap aftermarket vents skip. In Miami’s sun, a bargain vent starts cracking within 3 to 5 years. CertainTeed’s material usually lasts 12 to 15. The cost difference is maybe $3 to $4 per linear foot, and it’s simply not worth saving that on a part that protects your attic from Miami’s rain volume.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your CertainTeed Ridge Vent Installation Is Failing

  • Granules from your shingles collecting in gutters below the ridge, but only in a narrow strip – this means the vent baffle is rubbing against the shingle surface as the roof expands and contracts in Miami’s heat cycle. The vent edge acts like sandpaper on the shingle face.
  • Water stains on the ceiling near exterior walls, not in the middle of the room – water entering at the ridge travels down the roof deck until it hits a rafter or wall plate, then follows that line indoors. By the time you see the stain, the vent has been leaking through multiple storms.
  • A visible gap between the vent and the shingle line, or vent material that has lifted at the ends – CertainTeed vents are nailed along the outer edge. When the plastic warps from heat exposure, those nail points become hinges and the vent curls upward, breaking the seal.
  • Higher attic temperatures than you remember, or an AC system that runs longer cycles in summer – a blocked or collapsed ridge vent traps heat. In Miami, where attic temps can hit 140°F in August, a failed vent adds real load to your HVAC system.
  • You can see daylight through the vent from inside the attic, around the edges rather than through the baffle – this one’s easy to miss. The vent’s internal baffle should be the only thing you see light through. If light sneaks around the sides where the vent meets the roof deck, the flashing detail was wrong from day one.

Replacement Cost & What’s Included

In Miami, a full CertainTeed ridge vent replacement on a typical ranch or two-story home runs $850 to $1,400. The majority of that is labor and roof access setup. The vent material itself is relatively inexpensive, around $4 to $6 per linear foot retail, and a standard ridge line uses 30 to 50 linear feet of vent. Where the price moves is roof pitch, story height, and whether the existing vent was installed over a proper ridge slot or if we need to cut one.

Here’s how the cost breaks down:

  • Vent material (CertainTeed ShingleVent II): $120 – $300 depending on ridge length
  • Labor and setup (removal, inspection, installation, cleanup): $550 – $850
  • Ridge cap shingle replacement (if needed): $100 – $250

Every estimate we write in Miami includes the full scope listed line by line, with no allowances and no “miscellaneous” line. The number on your written estimate is the number on the final invoice. If we discover the roof deck is rotted at the ridge once the old vent is off, we stop, photograph it, and give you a written price for the additional repair before any work continues. That’s the Relay Visibility Guarantee at work: photo documentation before and after, and a live arrival time you can track on the day of the job. The 365-Day Done Right Promise covers every ridge vent replacement for a full year, including a free second visit if the repair fails.

Call (850) 318-3769 for an exact quote on your roof’s ridge line. Estimates are free, and we can usually give you a firm price from a phone description and a few photos.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

Here’s the honest split. You can absolutely inspect a failing ridge vent from the ground or with a ladder held by someone else. Look for the signs we listed above: lifted ends, visible gaps, shingle granules below the ridge. You can also check your attic for daylight peeking around the vent edges. None of that requires walking the roof.

What you should not do is attempt the replacement yourself. Walkable roof pitch seems easy from the ground. On a 2-story Miami home with Spanish tile or barrel tile sections, losing your footing while carrying a 4-foot vent section is a genuine fall risk. And the installation detail matters: the vent sits on a cut ridge slot, and getting the nail pattern, the overlap, and the end caps right is what keeps hurricane-driven rain out. We see homeowner-installed ridge vents that look fine from the street but leak from the first real storm. If the part is already failing, the roof itself has years of Miami weather on it. Let a crew that does this weekly handle the swap. Call (850) 318-3769 and we’ll schedule a time that works, with a live arrival time you can track the day we come.

FAQs

Every promise in writing, because a roof shouldn’t come with fine print.

If you’ve got a CertainTeed ridge vent that’s showing its age, or you’re not sure whether it’s still doing its job, call us at (850) 318-3769. You’ll get a real person on the line, a straight answer about what you’re looking at, and a free written estimate before any work begins. We’ll tell you exactly what goes on your roof, what it costs, and when it’s done, with photos before and after. That’s how we’ve operated since 2000, and it’s how we’ll handle your Miami home too.

Written by Dylan Pace, Owner, Crestview Roofing Co Miami at Crestview Roofing Co Miami, serving Miami and nearby areas.

Need Roofing help in Miami? Licensed & insured · Free in-home estimates response · free estimates
Call (850) 318-3769
Local Service Coverage

Request a Free Estimate in Miami

Tell us what you need - Crestview Roofing Co Miami responds fast. No obligation.

By sending this request, you accept our Privacy Policy and authorize us to contact you via phone, email, or SMS about your service request, including from the local pros who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch